Apr 12, 2022 Lämna ett meddelande

Analys av vattenmärkningsfenomen av elektroforetisk profilpasta skyddsfilm

Elektroforetiskt aluminium är aluminiumoxiden som anod, placerad i vatten-löslig emulsionslösning, genom likström, artificiellt avsatt på ytan av aluminiumoxidfilmbeläggningsfilmens skyddande skikt för att bilda elektroforetiskt aluminium.

Huvudegenskaper hos hög-elektroforetiskt aluminium:

1. Den har stark färgfilmhårdhet.

2, med hög vidhäftningsfilm, inte lätt att falla av åldrande.

3. Den har starkare väderbeständighet och alkalibeständighet än aluminiumoxid.

4, ytfärgen är rik, vacker, med spegel-liknande lystereffekt.

Elektroforetiska profiler är mer lämpade för användning utomhus, den nationella standarden 70 år av väderbeständighet grundläggande andra döda andra ytbehandlingar.

Electrophoretic profile packaging materials are mostly used for strong adhesion film as a protective film, aluminum profiles in a protective film for a period of time, the film is torn to find that aluminum profiles have film printing or called watermark. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarks has appeared in almost all aluminum factories, and there are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared.

Film watermarking is a common phenomenon, film such as air separation, and moisture formation, which has been recognized in the industry. Many factories have also done a large number of relevant experiments. There are several considerations:

1 stelningsprocessexperiment

180 degrees 30 minutes basically appear watermark boundary, 200 degrees 10 minutes effect is also better than 180 degrees 30 minutes effect. So the temperature and time is quite key, especially in the case of heat will fade the coloring way, must be integrated to weigh the curing process and color.

2 skyddande film viskositet och vattenspray experiment

There were watermarks 24 hours after spraying film for both high viscosity and medium viscosity, while there were almost no watermarks 24 hours after spraying film for low viscosity. It shows that the viscosity of the membrane has a great relationship. But there is a phenomenon, if sprayed with pure solvents such as alcohol, there is no watermark on any viscosity. The author cannot find a reasonable explanation for this phenomenon. I'll leave that to the right person.

3. Problem med elektroforestanklösning

Ovanstående är bara från analysen av resultaten, men sättet att hantera problemet i en annan fabrik får författaren att inse riktningen för det grundläggande problemet.

It is also a watermarking problem, but the delivery is urgent, and the change of low viscosity protective film is not guaranteed to be a problem, but also to observe the time. The workshop director decided to rearrange the electrophoresis tank. (Pull out to empty slot, can be added later). The process was not changed and the problem disappeared. I can't remember any new grooves having similar problems.

Följande är bara en slutsats. Utrustningen som ägs av författaren kan för närvarande inte stödja verifiering.

In electrophoresis, only the solvent can not be tested. It can be inferred from the above phenomenon that the solvent is reduced, and the principle of recovery equipment is to filter water and solvent from the main tank to water washing, and the solid components of water washing return to the main tank, and achieve the purpose of recovery. The volatile nature of the solvent and the lack of laboratory equipment, resulting in the failure to quantify the proportion of solvent imbalance.

Obalansen av lösningsmedel kan orsaka skada på färgfilmens kompakthet och enhetlighet och orsaka att vatten tränger in i färgfilmen, vilket resulterar i bildandet av vattenstämpel.

Sammanfatta ovanstående tre punkter, hoppas liknande fall kan jämföras för att hitta problemet.


Skicka förfrågan

whatsapp

Telefon

E-post

Förfrågning